general business contracts terms and definitions glossary

Acceptance - the unconditional agreement to an offer. This creates the contract. Before acceptance, any offer can be withdrawn, but once accepted the contract is binding on both sides. Any conditions have the effect of a counter offer that must be accepted by the other party.

Agent - somebody appointed to act on behalf of another person (known as the principal). The amount of authority to deal that the agent has is subject to agreement between the principal and the agent. However, unless told otherwise, third parties can assume the agent has full powers to deal.

Arbitration - using an independent third party to settle disputes without going to court. The third party acting as arbitrator must be agreed by both sides. Contracts often include arbitration clauses nominating an arbitrator in advance.

Breach of contract - failure by one party to a contract to uphold their part of the deal. A breach of contract will make the whole contract void and can lead to damages being awarded against the party which is in breach.

Collective agreement - term used for agreements made between employees and employers, usually involving trade unions. They often cover more than one organization. Although these can be seen as contracts, they are governed by employment law, not contract law.

Comfort letters - documents issued to back up an agreement but which do not have any contractual standing. They are often issued by a parent or associate company stating that the group will back up the position of a small company to improve its trading position. They always state that they are not intended to be legally binding. Also known as letters of comfort.

Company seal - an embossing press used to indicate the official signature of a company when accompanied by the signatures of two officers of the company. Since 1989 it has been possible for a company to indicate its agreement without use of the seal, by two signatures (directors or company secretary) plus a formal declaration. However, some companies still prefer to use a seal and the articles of a company can override the law and require a seal to be used.

Conditions - major terms in a contract. Conditions are the basis of any contract and if one of them fails or is broken, the contract is breached. These are in contrast to warranties, the other type of contract term, which are less important and will not usually lead to the breach of the contract - but rather an adjustment in price or a payment of damages.

Confidentiality agreement - an agreement made to protect confidential information if it has to be disclosed to another party. This often happens during negotiations for a larger contract, when the parties may need to divulge information about their operations to each other. In this situation, the confidentiality agreement forms a binding contract not to pass on that information whether or not the actual contract is ever signed. Also known as a non-disclosure agreement.

Consideration - in a contract each side must give some consideration to the other. Often referred to as the quid pro quo - see the Latin terms below. Usually this is the price paid by one side and the goods supplied by the other. But it can be anything of value to the other party, and can be negative - eg someone promising not to exercise a right of access over somebody else's land in return for a payment would be a valid contract, even if there was no intention of ever using the right anyway.

Consumer - a person who buys goods or services but not as part of their business. A company can be a consumer for contracts not related to its business - especially for goods or services it buys for its employees. Charities are also treated as consumers.

Due diligence - the formal process of investigating the background of a business, either prior to buying it, or as another party in a major contract. It is used to ensure that there are no hidden details that could affect the deal.

Employment contract - a contract between an employer and an employee. This differs from other contracts in that it is governed by employment legislation - which takes precedence over normal contract law.

Exclusion clauses - clauses in a contract that are intended to exclude one party from liability if a stated circumstance happens. They are types of exemption clauses. The courts tend to interpret them strictly and, where possible, in favour of the party that did not write them. In customer dealings, exclusion clauses are governed by regulations that render most of them ineffective but note that these regulations do not cover you in business dealings.

Exemption clauses - clauses in a contract that try to restrict the liability of the party that writes them. These are split into exclusion clauses that try to exclude liability completely for specified outcomes, and limitation clauses that try to set a maximum on the amount of damages the party may have to pay if there is a failure of some part of the contract. Exemption clauses are regulated very strictly in consumer dealings but these don't apply for those who deal in the course of their business.

Express terms - the terms actually stated in the contract. These can be the written terms, or verbal ones agreed before or at the time the contract is made (see implied terms).

Franchising - commercial agreements that allow one business to deal in a product or service controlled by another. For example, most car manufacturers give franchises to sell their cars to local garages, who then operate using the manufacturer's brand.

Going concern - accounting idea that a business should be valued on the basis that it will be continuing to trade and able to use its assets for their intended purpose. The alternative is a break-up basis, which sets values according to what the assets could be sold for immediately - often much less than their value if they were kept in use.

Implied terms - are terms and clauses that are implied in a contract by law or custom and practice without actually being mentioned by any party. Terms implied by custom and practice can always be overridden by express terms, but some terms implied by law cannot be overridden, particularly those relating to consumers (see exemption clauses).

Incorporate - inclusion in, or adoption of, some term or condition as part of the contract. It differs from its company law definition where it refers to the legal act of creating a company.

Injunction - a remedy sometimes awarded by the court that stops some action being taken. It can be used to stop another party doing something against the terms of the contract. Injunctions are at the court's discretion and a judge may refuse to give one and award damages instead - see the finance contract terms below.

Joint and several liability - where parties act together in a contract as partners they have joint and several liability. In addition to all the partners being responsible together, each partner is also liable individually for the entire contract - so a creditor could recover a whole debt from any one of them individually, leaving that person to recover their shares from the rest of the partners.

Joint venture - an agreement between two or more independent businesses in a business enterprise, in which they will share the costs, management, profits or benefits arising from the venture. The exact shares and responsibilities will be set out in a Joint Venture Agreement.

Jurisdiction - a jurisdiction clause sets out the country or state whose laws will govern the contract and where any legal action must take place. Don't forget that England and Scotland have different legal codes, and this may need to be specified.

Letters of comfort - see Comfort letters.

Liability - a person or business deemed liable is subject to a legal obligation. A person/business who commits a wrong or breaks a contract or trust is said to be liable or responsible for it.

Limited liability - usually refers to limited companies where the owners' liability to pay the debts of the company is limited to the value of their shares. It can also apply to contracts where a valid limitation clause has been included in the terms.

Liquidation - the formal breaking up of a company or partnership by realising (selling or transferring to pay a debt) the assets of the business. This usually happens when the business is insolvent, but a solvent business can be liquidated if it no longer wishes to continue trading for whatever reason (see receivership in the financial terms below).

Misrepresentation - where one party to a contract makes a false statement of fact to the other which that other person relies on. Where there has been a misrepresentation then the party who received the false statement can get damages for their loss. The remedy of rescission (putting things back to how they were before the contract began) is sometimes available, but where it is not possible or too difficult the court can award damages instead.

Non-executive director - a director who does not work directly for a company but advises the other directors. Non-executive directors have the full powers and authority of any other director and can bind the company to any contract.

Offer - an offer to contract must be made with the intention to create, if accepted, a legal relationship. It must be capable of being accepted (not containing any impossible conditions), must also be complete (not requiring more information to define the offer) and not merely advertising.

Parent company - where one company owns more than 50 per cent of the voting rights of another company it is the parent of that company which in turn becomes its subsidiary. It can also occur where the parent has less than 50 per cent but can control the board of directors of the subsidiary: that is, it has the power to appoint and remove directors without referring to other shareholders.

Partnership - when two or more people or organizations join together to carry on a business.

Proxy - a person who acts on behalf of another for a specific purpose, or the form used to make such an appointment. In a company a shareholder can appoint a proxy to attend a meeting and vote on their behalf.

Quorum - the minimum number of people needed at a meeting for it to proceed and make any decisions.

Ratification - giving authority to an act that has already been done. A company general meeting resolution can ratify an act previously done by the directors; or a principal can choose to ratify the act of an agent that was beyond the specified power of the agent.

Registered Office - the official address of the company as stated on the register at Companies House. Any documents delivered to this address are considered to be legally served on the company.

Repudiation - has two meanings in contract law. The first is where a party refuses to comply with a contract and this amounts to a breach of contract. The second is where a contract was made by a minor (person under the age of 18) who then repudiates it at or shortly after the age of 18. Then the repudiation voids the contract rather than causing a breachof contract.

Restrictive covenant - is often included in long-term contracts and contracts of employment to stop the parties working with competitors during the period of the agreement and for some time thereafter. However, unless carefully written the courts will see them as being a restraint of trade and not enforce them.

Service contract - directors and officers of a company are usually given service contracts that are different to a contract of service or employment contract. This is because directors and officers are not always employees and the effect of employment law is different.

Shareholders' agreement - an agreement between all of the shareholders about how the company should be run and the application of the rights of the shareholders. This acts as a contract between the shareholders. The company itself is not bound by it, as it is not a party to the agreement.

Subject to contract - words used on documents exchanged by parties during contract negotiations. They denote that the document is not an offer or acceptance and negotiations are ongoing. Often the expression without prejudice is used when subject to contract is meant.

Trademark - a registered name or logo that is protected by law. Trademarks must be granted through the Patent Office.

Underwriter - a person who signs as party to a contract. Now usually only applied to insurance contracts where the underwriters are those who agree to bear all or part of the risk in return for the premium payments. Underwriters at Lloyd's of London are also known as names.

Unfair terms - some terms are made unfair by legislation and will not be enforced by the courts and may even be interpreted against the person who included them in the contract. The legislation mainly protects consumers, but can also apply where there is a business-to-business contract in which one party is significantly more powerful than the other.

Void - a void contract is one that cannot be performed or completed at all. A void contract is void from the beginning (ab initio - see the Latin terms below) and the normal remedy, if possible, is to put things back to where they were before the contract. Contracts are void where one party lacks the capacity to perform the contracted task, it is based on a mistake, or it is illegal.

Warranties - promises made in a contract, but which are less than a condition. Failure of a warranty results in liability to pay damages (see the financial terms below) but will not be a breach of contract unlike failure of a condition, which does breach the contract.

Without prejudice - a term used by solicitors in negotiations over disputes where an offer is made in an attempt to avoid going to court. If the case does go to court no offer or facts stated to be without prejudice can be disclosed as evidence. Often misused by businesses during negotiations when they actually mean subject to contract.

financial contracts terms and definitions glossary

Note: terms highlighted in bold within the current definitions (eg wound up) are explained elsewhere in this guide.

Bankruptcy - the formal recognition that a person cannot pay their debts as they are due. Note this only applies to individuals, companies and partnerships that become insolvent are wound up.

Damages - money paid as the normal remedy in the law as compensation for an individual or company's loss. If another type of remedy is wanted (such as an injunction - see general contract terms below) but cannot be or is not given by the court, then damages will be awarded instead.

Debenture - a formal debt agreement. It refers to both the agreement and the document that verifies it. It is usually issued by companies and is generally supported by security over some property of the debtor. If the debtor defaults, the creditor can take and sell the property. Debentures are often transferable, so the creditor can sell it and there are markets on formal stock exchanges that deal in types of debenture. It is sometimes referred to as debenture stock. A mortgage is a type of debenture but one that is always secured, usually against land.

Floating charge - a form of security for a debt. Instead of naming a specific property, which can be taken by the creditor if the debtor defaults (as in a fixed charge like a mortgage), a class of goods or assets is named, such as the debtor's stock. This allows the debtor to trade in the assets freely, but if the debtor fails to make repayments then the floating charge becomes a fixed charge (known as crystallisation) over all the stock at that time. The creditor can then take and sell it to recover the debt.

Guarantee - a secondary agreement by which one person promises to honour the debt of another if that debtor fails to pay. Banks and other creditors often call on directors of small companies to give their personal guarantees for company debts. A guarantee must be in writing. The guarantor can only be sued if the actual debtor can't pay, in contrast to indemnity.

Indemnity - a promise by a third party to pay a debt owed, or repay a loss caused, by another party. Unlike a guarantee, the person owed can get the money direct from the indemnifier without having to chase the debtor first. Insurance contracts are contracts of indemnity: the insurance company pays first, and then tries to recover the loss from whoever caused it.

Insolvency - the situation where a person or business cannot pay its debts as they fall due (see bankruptcy, liquidation and receivership).

Liquidation - the formal breaking up of a company or partnership by realising (selling or transferring to pay a debt) the assets of the business. This usually happens when the business is insolvent, but a solvent business can be liquidated if it no longer wishes to continue trading for whatever reason (see receivership).

Receivership - the appointment of a licensed insolvency practitioner to take over the running of a company. A creditor with a secured debt appoints the receiver. The job of the receiver is to recover the debt either by taking the security and selling it or by running the business as a going concern until the debt is paid off (see liquidation).

Redemption of shares - where a company issues shares on terms stating that they can be bought back by the company. Not all shares can be redeemed, only those stated to be redeemable when they were issued. The payment for the shares must generally come from reserves of profit so that the capital of the company is preserved.

Remedy/Remedies - payments or actions ordered by the court as settlement of a dispute. The most common is damages (a payment of money). Others include specific performance (of an action required in the contract), injunction (see the general contract terms above) and rescission - putting things back to how they were before the contract was signed.

Stamp duty - a tax on transactions. Only applied to specific types of transactions eg dealings in land and buildings, shares and ships.

Wound up - winding-up is the formal procedure for disbanding a company.

property contracts terms and definitions glossary

Note: terms highlighted in bold within the current definitions (eg deed) are explained elsewhere in this guide.

Break clause - a clause that allows a tenant to end a lease at specific times during the period of the lease.

Conveyance - a deed that conveys property rights.

Covenant - a promise within a contract for the performance or non-performance of a specified act.

Deed - a written document by which a person transfers ownership of real property to another. A deed must be properly executed and delivered in order to be effective.

Disclaimer - a written document denying legal responsibility, or a limitation of rights that might otherwise be claimed.

Easement - an interest in land owned by another that entitles its holder to a specific limited use or enjoyment eg the right to cross the land, or to continue to have an unobstructed view over it.

Encroachment - when a building or some portion of it, or a wall or fence, extends beyond the land of the owner and illegally intrudes upon that of an adjoining owner.

Equity - the monetary value of a property after any claims, such as a mortgage, are taken away.

Eviction - the dispossession of a tenant of leased property by force or through the legal process.

Exchange - the exchange of agreed, signed contracts. The transaction between the seller and the buyer is then legally binding, and completion (including the final transfer of money) usually takes place two to four weeks later.

Fixture - a permanently fixed piece of furniture or equipment incorporated into a property. Removing it would cause damage to buildings or land, and is therefore regarded as legally part of it.

Freehold - outright ownership of a property. This type of tenure contrasts with leasehold where the leaseholder has the rights to occupy a property for a specified period of time.

Habitable - suitable and fit for a person to live in and free of any faults that might endanger the health and safety of occupants.

Holdover Tenancy - a tenancy that arises when someone remains in possession of a property after the expiration of the previous tenancy and is recognised by the landlord by accepting rent.

Indenture - a deed or other document to which two or more parties are bound.

Invitee - a person, such as a customer, who is present in a place either by the express or the implied invitation of the occupier. This normally means that the occupier has to exercise reasonable care to protect the safety of the invited person.

Landlord - the owner of property that is leased or rented to others.

Lease - a contract by which an owner of property conveys exclusive possession and use of it for a specified rent and for a specified period - after which the property reverts to the owner.

Legal duty - the responsibility to others to act according to the law.

Loss of use - circumstances where a property cannot be occupied in the normal way, through the negligence or wrongdoing of another party.

Notice to quit - a notification or communication to a tenant to leave specified premises usually for a breach of terms of the lease.

Occupancy - holding, possessing, or occupying premises.

Occupant - someone who occupies a particular place.

Partition - the division into parts of property held jointly, or the sale of such property by a court with division of the proceeds.

Party wall - a wall that divides two separate premises, which is the joint responsibility of both owners.

Premises - a building or part of a building usually including the adjacent grounds.

Quit - for a tenant to move out of rented premises.

Reasonable wear and tear - damage sustained in the course of normal use.

Repossess - to take possession again of a property or goods after non-payment of money owed. This might follow a court order.

Search - an inspection carried out to establish whether any legal restraints, planning applications or aspects of legal ownership might affect the purchase of a property. Solicitors will look into land registry and local government records when pursuing this.

Sublease - a lease that is given by a tenant of part or all of the leased premises, to another person for a period shorter than the original lease, while still retaining some interest.

Tenancy - the temporary possession or occupancy of property that belongs to another. It also refers to the period of a tenant's possession.

Tenure - the way in which a property is held eg freehold tenure or leasehold tenure.

Trespass - a wilful act or active negligence that causes an injury to a person or the invasion of their property.

Vendee - the person to whom a property is sold.

Vendor - the person who is selling a property.

latin contracts terms and definitions glossary

Note: terms highlighted in bold within the current definitions (eg mala fides) are explained elsewhere in this guide.

Ab initio (ab init) - from the beginning. Can mean that breaking some terms in a long-running contract results in the contract having been broken from the start.

Bona fide - in good faith. Usually implies an amount of trust that the parties are acting without any hidden motives. The opposite is mala fides - in bad faith.

Bona vacantia - vacant property. Refers to a situation where property or goods end up not being owned by anyone. This can happen if a person dies without heirs or a company is struck off without all its property being distributed. It can also occur where a contract becomes void and property under it cannot be restored to an owner. In the UK, any such property then belongs to the Crown and expensive proceedings are required to get it back.

Caveat emptor - buyer beware. This is a general rule that it is up to the buyer to find out if what they are buying is what they want. Consumer regulations require certain information to be disclosed to consumers and insurance contracts are covered by the uberrimae fides - but many types of business contracts are covered by the caveat emptor rule.

Consensus ad idem - agreement on an idea. This is the concept that the parties to the contract must all be in agreement on the basis of the contract. If it is discovered that the parties were thinking different things, then there is no consensus and the contract is void.

De facto - in fact. The opposite of de jure (in law). Having a practical effect different from the legally accepted or expected situation. For example, a person who deliberately or negligently gives the impression to another party of being a company director, can be treated as a de facto director. So any agreement or statements will bind the company they make as if a properly appointed director made them.

De jure - in law. According to law, the opposite of de facto.

De minimis - short for de minimis non curat lex: the law does not concern itself with trifles. It basically means insignificant or too small to bother with.

De novo - start afresh. Starting a new contract on the same basis as the old.

Exempli gratia (eg) - for example. One or more examples from a greater list of possibilities. Compares with id est (ie), that is, which indicates a full, definitive list of all possibilities.

Ex gratia - out of grace. A gift made without any obligation on the part of the giver or any return from the receiver.

Ex parte - on behalf of. An action, usually a legal action, taken by a party on someone else's behalf.

Ex post facto - because of some later event. Where a later event or occurrence interferes with an earlier agreement.

Id est (ie) - that is. Is followed by a definition or list of items or options that relate to a preceding statement or condition. Differs from exempli gratia (eg) - for example - that gives some, but not all, examples of the items or options.

Inter alia - among other things. This is often used in contracts to indicate that what is being specifically referred to is part of a larger group without having to name all the elements.

Mala fides - bad faith, opposite of bona fide.

Nemo dat quod non habet - no one can give what they do not have. The principle that a seller cannot pass on a better right to the property than they actually have. So, if goods are stolen, the buyer does not get ownership even if there was no indication that they were stolen.

Non compos mentis - not of sound mind. A person who is not of sound mind will not have full capacity to enter into a contract.

Non est factum - not my act. This is a denial by a person that they were actually involved in some action or dealings. In a contract, it can occur if a party denies that they signed the contract - that someone else forged their signature.

Pari passu - equal and even. This relates to shares to denote that newly issued shares have the same rights and restrictions as those of the same class already existing.

Prima facie - at first sight. A prima facie fact is one that seems to be correct, but may subsequently be proved wrong by other evidence.

Pro rata - for the rate. Divided in proportion to some existing split. For example, a pro rata share issue is offered in proportion to the number of shares each shareholder already has.

Pro tanto - for so much. Means to the extent specified, but not more.

Pro tempore (pro tem) - for the time being.

Quid pro quo - something for something. The usual definition of consideration (see the general contracts terms above) in a contract, on the basis that each party should offer something to the other.

Uberrima fides - utmost good faith. The concept that a party to certain types of contract must act in good faith and declare all relevant facts to the other side even if they do not ask. This only usually applies to insurance contracts where the insured person must declare all known risks. It is an exemption to the general contract rule of caveat emptor.

(http://www.businessballs.com/businesscontractstermsdefinitionsglossary.htm)

© Crown copyright 2004. The provision of this material by Business Link (now Gov.uk) is gratefully acknowledged. It is subject to Crown copyright.

more links

http://www.felp.ac.uk/taxonomy/term/365

http://www.public-record.com/content/general/legalterms.asp

http://www.plainenglish.co.uk/files/legalguide.pdf

https://en.wikipedia.org/wiki/Category:Contract_clauses

http://www.iaapa.org/docs/institutes/contract-checklist.pdf?sfvrsn=0

http://www.legalmatch.com/law-library/article/common-clauses-in-a-contract.html

What Is a Contract Clause?

A contract clause is a specific provision or section within a written contract. Each clause in a contract addresses a specific aspect related to the overall subject matter of the agreement. Contract clauses are aimed at clearly defining the duties, rights and privileges that each party has under the contract terms. Clauses can be located in various places in the contract, but most of the time they appear towards the end of the document.

Contract clauses can take many forms and can cover nearly aspect of business and commercial interests. A common example is a non-disclosure clause in an employment contract, where the employer agrees not to disclose any confidential information belonging to the company.  Contract clauses are enforceable along with the rest of the contract under state and federal laws.

What Are Some Common Clauses in a Contract?

The use of various clauses all depends on the needs of the parties. Some clauses appear more frequently in contracts than other ones. There are “boilerplate” clauses that may appear as a standard part of some business contracts. Or, the parties may create specific clauses that are tailor-made for each contract with a client. 

Some common contract clauses include:

• Choice of Law / Forum Clause: In these types of clauses, the parties agree that the contract terms will only be interpreted according to the laws of a specific state. Also, they may agree that litigation will only occur in a specified jurisdiction. These are only enforceable if they don’t conflict with general requirements of law.
• Statute of Limitations Clause: These state the time frame in which a lawsuit can be filed after a breach of contract or other violation. Again, such clauses can’t violate already existing laws and filing requirements. 
• Time of Performance Clause: These indicate the time frame in which the contract duties can or can’t be performed. Some contracts state that “time is of the essence”, meaning that a breach of contract suit can be filed if the duties aren’t performed in a reasonable amount of time.
• Merger Clause: A merger or integration clause states that the current written contract overrides any previous oral or written agreements.
• Indemnification Clause: These agreements indemnify (release from liability) the other party in the event that losses or expenses are incurred. These should be used with caution, as they could limit the ability to recover damages for losses
• Non-Waiver Clause: These protect parties who excuse the other party for non-performance of contract terms. For example, suppose one party only makes payments every other month when the contract requires monthly payments. If the non-breaching party accepts the payments but doesn’t file a lawsuit, the non-waiver clause allows them to recover the missing payments. In other words, the party doesn’t “waive” their full contract rights by accepting non-complying action from the other party.
• Severability Clause: This ensures that the remainder of the contract is enforceable even if one part of the contract is determined to be invalid. Without such a clause, it’s possible for the entire contract to be invalidated by the court if only one provision is found to be invalid. Also called a savings clause.
• Arbitration Clause: States that any legal disputes are to be resolved through arbitration rather than litigation. 
• Liquidated Damages Clause: Allows the non-breaching party to recover damages in the event that actual damages are difficult to calculate. However, the amount of liquidated damages needs to be reasonable in light of the circumstances.
• Attorney Fees Clause: These state that the losing party shall reimburse the other party for attorney’s fees (and sometimes other court fees and costs).

Getting a particular clause enforced depends largely on the laws in each region. Generally speaking, parties can form clauses are they need them, but they need to comply with existing contract laws and regulations.

Do I Need a Lawyer for Help With Contract Clauses?

Many of more common clauses in a contract are frequently used, but they require the assistance of a lawyer during the drafting and reviewing stages. If you have any legal needs regarding contract clauses, you should contact a qualified contracts lawyer in your area.  Your attorney can help you create and negotiate the clauses, and can represent you in court if you need assistance with a lawsuit. 

- See more at: http://www.legalmatch.com/law-library/article/common-clauses-in-a-contract.html#sthash.DqWB8cWi.dpuf

http://www.lsuc.on.ca/For-Lawyers/About-Your-Licence/Audits-and-Reviews/The-Contract--Potential-Issues-and-Sample-Clauses/

http://www.baylor.edu/content/services/document.php/64691.pdf

http://www.lexology.com/library/detail.aspx?g=ab1e0ed6-f91d-485a-a69d-87f68beec265

https://www.entrepreneur.com/article/191778

http://www.mondaq.com/uk/x/110368/Contract+Law/An+A+to+Z+of+Contract+Clauses+Key+Terms+for+your+Contracts

http://www.ulapland.fi/loader.aspx?id=60a15dd5-ebc6-4d06-a730-c363a4cf4327

https://www.lawctopus.com/academike/exclusive-jurisdictional-clause-commercial-contracts/

https://blog.ipleaders.in/legal-enforceability-termination-convenience-clause-india/

http://www.bjflaw.com/contract-issues-for-the-business-owner

http://www.toastnetwork.co.uk/10-legal-facts-every-business-owner-know

http://www.dinsmore.com/small_business_owner_contract_law/

http://www.haguelawblog.com/2016/05/five-essential-things-all-business-owners-and-their-lawyers-should-know-before-signing-global-contracts/

https://kendricklaw.wordpress.com/2011/09/26/business-law-10/

https://www.entrepreneur.com/article/28884

http://www.bjflaw.com/resources/legal-articles#special_needs_trusts